Inversor de Controle Vetorial de Motor de Baixa Tensão Série XMFC 550-MX
Parâmetros
Item | Parameter | |
Power supply | Rated supply voltage | three phase 380V ~ 480V |
Allowed voltage fluctuations | -15%~+10% | |
Rated supply frequency | 50/60Hz | |
Allowed Frequency Fluctuations | ±5% | |
Output | Max output voltage | Three-phase 380V~480V Go after the input voltage |
Max Output frequency | 500Hz | |
Carrier Frequency | 0.5 ~ 16kHz (automatic adjustment according to the temperature, and the adjustment range differs for different models ) | |
Overload capacity | 150% rated current 60s; 180% rated current 3s. | |
Basic Functions | Frequency setting resolution | Digital setting: 0.01Hz Analog setting: max frequency × 0.025% |
Control Mode | Open Loop Vector Control (SVC) V/F Control | |
Pull-in torque | 0.3Hz/150%(SVC) | |
Speed range | 1 : 200(SVC) | |
Speed Stabilizing accuracy | ±0.5%(SVC) | |
Torque boost | Automatic torque boost Manual torque increase 0.1% ~ 30.0% | |
V/F Curve | Three ways: linear type; multi-point type; N-th power V/F curve (n=1.2, 1.4, 1.6, 1.8, 2) | |
Acceleration and deceleration curve | Linear or S-curve acceleration and deceleration; Four kinds of acceleration and deceleration time. Adjustable range 0.0~6500.0S | |
DC braking | Frequency of DC braking: 0.00Hz ~ max frequency Braking time: 0.0s ~ 36.0s Braking action current value: 0.0% ~ 100.0% | |
Jogging control | Jogging frequency range:0.00Hz ~ 50.00Hz Jog acceleration- deceleration time:0.0s ~ 6500.0s | |
Simple PLC, multi-stage speed operation | Up to 16-stage speed operation via built-in PLC or control terminal | |
Built-in PID | Implementing closed-loop control in process control applications | |
Overvoltage and overcurrent stall control | Automatically limit current and voltage during operation to prevent fault shutdown due to frequent over-current and over-voltage | |
Fast current limiting function | Reduce overcurrent fault shutdown to ensure the normal operation of the frequency converter | |
Control interface | Digital input | 5 multi-function digital inputs. One of which supports max 100kHz pulse input function |
Analog input | 2 analog inputs. Both supporting 0 ~ 10V or 0 ~ 20mA analog input, switch voltage or current input via jumper | |
Digital output | 2 open-collector digital outputs. One of which supports max 100KHz square wave output | |
Analog output | 1 analog output. Supporting 0 ~ 10V or 0 ~ 20mA analog output, switch voltage or current output via jumper | |
Relay output | 1-channel relay output, including 1 normally open contact, 1 normally closed contact | |
Standard communication interface | 1 channel RS485 communication interface | |
Expansion interface | Function expansion interface | Connectable to IO expansion card, PLC programmable expansion card, etc. |
Operation panel | LED digital display | 5-digit display of parameters and settings |
Indicator light | 4 status indications, 3 unit indications | |
Button’s Function | 5 function buttons including 1 multi-function button. The function can be set via parameter P0 - 00 | |
Shuttle Knob | Add, minus and confirm | |
Parameter copy | Fast upload and download parameters | |
Protective function | Basic protection | Input and output phase loss, overvoltage, undervoltage, overheating, overload, overcurrent, short circuit, voltage and current limiting, fast current limiting and other protection functions |
Environment | Operation condition | Indoor, no conductive dust and oil, etc. |
Operating ambient temperature | -10°C ~ +40°C (40°C ~ 50°C, derate 1.5% for every 1°C increase in temperature | |
Humidity | Less than 95% RH, no condensation | |
Operating altitude | No derating below 1000m, derate by 1% for every 100m elevation above 1000m (<=1000m without derating, >1000m with current derating 1% per 100m) | |
Ambient temperature for Storage | -20℃ ~ +60℃ | |
Vibration | Less than 5.9m/s² (0.6g) | |
Installation method Mounting mode | Wall-mounted or flush-mounted installation in the cabinet (Need to choose the appropriate installation accessories) | |
IP degree of protection | IP20 |
Descrição
O Drive de Frequência Variável (VFD) da série XFC500 utiliza DSPs (Processadores de Sinal Digital) de alto desempenho como o núcleo de controle e aplica um algoritmo de controle vetorial sem sensor de velocidade de excelente desempenho para alcançar o controle e a regulação precisos de motores assíncronos. As funções de expansão flexíveis e diversas e o design de alta confiabilidade atendem aos requisitos de uma variedade de aplicações e ambientes.
Método De Instalação
1.Single machine installation
XFC500-3P4-**** G | Mounting Clearance (mm) | |
1K50G ~ 15K0G | A1 ≥ 150 | B1 ≥ 10 |
18K5G ~ 160KG | A1 ≥ 150 | B1 ≥ 30 |
XFC500-3P4-**** G | Mounting Clearance (mm) | |||
185KG ~ 450KG | A1 ≥ 150 | B1 ≥ 10 | B2 ≥ 20 | C1 ≥ 20 |
2. Side-by-side installation
XFC500-3P4-**** G | Mounting Clearance (mm) | ||
1K50G ~ 15K0G | A1 ≥ 150 | B1 ≥ 10 | C1 ≥ 10 |
18K5G ~ 160KG | A1 ≥ 150 | B1 ≥ 30 | C1 ≥ 10 |
3. Up and down vertical installation
XFC500-3P4-**** G | Mounting Clearance (mm) |
1K50G ~ 15K0G | D1 ≥ 300 |
18K5G ~ 160KG | D1 ≥ 400 |
Especificações
Model XFC500-3P4-**** G | Motor power | Rated input capacity kVA | Rated input current A | Rated output current A | |
1K50 G | 1.5kW | 2.0hp | 3.2 | 4.8 | 4 |
2K20 G | 2.2kW | 3.0hp | 4.5 | 6.8 | 5.6 |
4K00 G | 4kW | 5.4hp | 7.9 | 12 | 9.7 |
5K50 G | 5.5kW | 7.4hp | 11 | 16 | 13 |
7K50 G | 7.5kW | 10.1hp | 14 | 21 | 17 |
11K0 G | 11kW | 14.8hp | 20 | 30 | 25 |
15K0 G | 15kW | 20.1hp | 27 | 41 | 33 |
18K5 G | 18.5kW | 24.8hp | 33 | 50 | 40 |
22K0 G | 22kW | 29.5hp | 38 | 57 | 45 |
30K0 G | 30kW | 40.2hp | 51 | 77 | 61 |
37K0 G | 37kW | 49.6hp | 62 | 94 | 74 |
45K0 G | 45kW | 60.3hp | 75 | 114 | 90 |
55K0 G | 55kW | 73.8hp | 91 | 138 | 109 |
75K0 G | 75kW | 100.6hp | 123 | 187 | 147 |
90K0 G | 90kW | 120.7hp | 147 | 223 | 176 |
110K G | 110kW | 147.5hp | 179 | 271 | 211 |
132K G | 132kW | 177.0hp | 167 | 253 | 253 |
160K G | 160kW | 214.6hp | 201 | 306 | 303 |
185K G | 185kW | 248.1hp | 233 | 353 | 350 |
200K G | 200kW | 268.2hp | 250 | 380 | 378 |
220K G | 220kW | 295.0hp | 275 | 418 | 416 |
250K G | 250kW | 335.3hp | 312 | 474 | 467 |
280K G | 280kW | 375.5hp | 350 | 531 | 522 |
315K G | 315kW | 422.4hp | 393 | 597 | 588 |
355K G | 355kW | 476.1hp | 441 | 669 | 659 |
400K G | 400kW | 536.4hp | 489 | 743 | 732 |
450K G | 450kW | 603.5hp | 550 | 835 | 822 |
Note: Please contact our sales staff for model selection of 500K and above.This is a paragraph